Blade Info 2

These heafty blades are 3/16"
thick, flame hardened tool steel.
Tempered to a beautiful straw
color for a quality edge.

These are used in cutting the
side straight edge of bridge notches,
before finishing off with a notching
chisel. First the side is sawn with a thin
kerf fine saw. Then, this knife is struck to
remove a shaving off the edge, cleaning
up the saw marks. It also applies the
profile of the notch that is desired,
Depending on the straight, or curved
shape each craftsman uses. Many use
the set of 3 to give the versatility they
enjoy when notching.